PY-CD-380 Electric Dialysis Bed

PY-CD-380 is the height-adjustable model in our PY-CD dialysis bed line. Three electric actuators move the backrest, the leg rest and the whole mattress platform, so a patient can be taken from a seated position at 580 mm to a flat treatment position at up to 820 mm without the nurse lifting anything. If your unit wants one bed that works as a dialysis chair during the session and a full bed afterwards, this is the model to quote.

PY-CD-380 set to the chair position — blue upholstery

At a glance

• 3 electric actuators — backrest, leg rest and platform height
• 580–820 mm mattress height, set from the hand control
• 240 kg safe working load, 220 kg maximum patient weight
• 2040 × 680 mm mattress platform with 1260 mm side rails

Every position used during a session

One frame, three actuators. The photographs below are the same PY-CD-380 through the positions a dialysis unit actually uses — from a seated cannulation position to a flat hypotensive position, without the patient being moved off the bed.

Reclined treatment position

Flat position, platform at full height

Raised to working height on central-lock castors

Backrest and knee section articulated separately

What makes the 380 different

1. The height range is the point. Most dialysis beds in this class sit at a fixed 530 mm. The 380 travels 580–820 mm on its own actuator, so the mattress can be dropped for a patient transferring from a wheelchair and raised to a working height for cannulation, dressing changes or line checks — without the nurse bending over the bed.

2. One foot locks all four castors. The bed runs on 5 inch central-lock castors: a single pedal on either end brakes all four wheels, which is what makes a 110 kg bed safe for one nurse to move and park in a busy unit.

3. It is a chair and a bed at the same time. Backrest −12° to 75°, leg rest −35° to 12°, plus Trendelenburg positioning on the platform actuator. A full dialysis session can be run seated and then flattened for a patient who becomes hypotensive, with no transfer in between.

The 110 kg frame, five-inch central-lock castors and the folding side rail from the side

Built for dialysis units

The 380 is specified for hemodialysis units that run long sessions and want the patient to stay in one place from arrival to leaving. The mattress platform is 680 mm wide — the same width as the rest of the PY-CD dialysis range — which is narrow enough to fit between fixed dialysis stations and wide enough for a 220 kg patient. The frame is Q235 steel; the mattress and side-rail pads are PU, so blood, saline and disinfectant wipe off without soaking into the foam. The optional folding tray table swings over the patient for meals and clamps flat against the rail when not in use, and the phone holder keeps a patient's own device off the mattress.

Nine-position folding side rail with the release lever at the head end

Also used for blood collection and infusion

Because the 380 reclines through a full chair-to-flat range, the same bed is bought for blood collection rooms and infusion centres — the two other settings where a patient has to sit for an hour or more and may need to lie down quickly. If your requirement is a chair rather than a bed, our electric dialysis chairs cover the same three settings at a lower price; the PY-YD-211 and PY-YD-230 are the models we quote for blood collection.

Specifications

Standard colourways: blue, lake green, green and quiet blue — other colours on request

Which PY-CD model fits your unit?

All PY-CD dialysis beds share the same 680 mm platform, 240 kg working load, 5 inch central-lock castors and −12°/75° backrest. The differences are the actuator count, whether the height is fixed or electric, and whether the bed has a built-in weighing display.

The full line is listed on the dialysis beds page. ICU beds with lateral tilt (PY-CD-182, 183, 610, 614, 615) are a separate range.

FAQ

What is the difference between the PY-CD-380 and the PY-CD-383?
Both use the same frame and the same 580–820 mm electric height adjustment. The 383 adds a built-in weighing display and a PU mattress; the 380 is supplied with the standard mattress and the folding tray table. If your protocol requires pre- and post-session weighing at the bed, quote the 383.

Can the bed be used as a chair?
Yes. The backrest runs −12° to 75° and the leg rest −35° to 12°, so a session can be run seated and the patient laid flat in one movement. That is the main reason units buy this model instead of a fixed-height bed.

What is the maximum patient weight?
The safe working load is 240 kg and the maximum patient weight is 220 kg, which covers the large majority of dialysis patients including bariatric cases.

What power supply does it need?
AC 100–240 V, 50/60 Hz at 120 W, so the same bed can be shipped to 110 V and 220 V markets without a transformer.

Can you supply it with our own branding?
Yes. The PY-CD-380 is available for OEM and ODM projects, including upholstery colour and labelling. Contact us for MOQ, lead time and documentation.

Request a quotation for the PY-CD-380 — send your quantity, destination port and voltage to our sales team and we will reply with pricing and the current certificate pack.